Home > Blog > Company
bLOG

How Do You Charge A Solar Street Light?

Oct 24, 2024
Because the energy of solar street lights comes from clean, pollution-free, renewable solar energy, so using solar led street lights is a green, environmentally friendly, and cost-effective lighting solution. But at the same time, you may worry that if there is not enough sunlight, can the solar powered streetlights still work normally? In the following article, let's learn about the working principle of solar street lights and related information about how to effectively charge solar street lights.


 

Working principle of solar street lights

How do solar street lights work? In fact, it is very simple. The solar panels of solar led street lights fully receive sunlight during the day and convert it into electrical energy, which is stored in the battery. In the evening or when there is insufficient light, the light sensor will trigger the street light to turn on, and the electricity in the battery will light up the LED light. When dawn comes, the light sensor detects that there is enough light, and the street light will automatically turn off. Next, the solar panel will start to receive and convert solar energy into electrical energy again. In this way, the solar street light can operate independently.

How long does it take to charge a solar street light?

Different solar led street lights designs may have different charging times, especially street light systems with large-capacity batteries and high-power solar panels, which can store enough electricity for nighttime use in a shorter time. Generally, on sunny days with plenty of sunlight, solar powered outdoor street lights usually take 6-8 hours to fully charge; on cloudy or overcast days, the charging time will be relatively long, which may extend to more than 10 hours or even fail to fully charge.


 

How to charge solar lights for the first time?

It is very important to charge the solar powered streetlights for the first time. This can not only verify whether the solar street light system can operate normally but also fully activate the battery, which has an important impact on extending the service life of the battery. So what are the precautions for charging the solar-powered outdoor street lights for the first time?

1. Ensure the first charging time

When charging the solar street light for the first time after installation, make sure that the solar panel can receive sufficient sunlight. Generally speaking, the first charging time should be 2 to 3 consecutive sunny days. During this period, please keep the solar powered outdoor street lights in the off state, only charge, not discharge, to ensure that the battery is fully charged. This is very important to ensure that the battery capacity is fully activated. Therefore, when installing solar energy, try to choose a sunny day. If it is installed on a rainy day, the charging may be insufficient, affecting future use.

2. Check the direction and angle of the solar panel.

Please make sure that the solar panel is facing the sun and adjust the angle to obtain the maximum lighting efficiency. If you are in the northern hemisphere, the solar panel can be tilted as far as possible to the south. The angle of the solar panel can be adjusted according to the latitude of the area.

3. Ensure that the installation location of the solar street light is unobstructed.

Before charging for the first time, the location where the solar panel is installed must be free of obstructions, and there must be no tall trees or buildings around that may affect the solar panel's ability to receive sunlight, thereby affecting charging efficiency.

4. Temperature conditions

When charging the solar-powered outdoor street lights for the first time, try to avoid extreme weather and do not do it in an extremely high or low-temperature environment, which may affect the performance of the battery.

5. Ensure that the wiring and connection are normal.

When installing the solar street light, check whether the wiring between the solar panel and the controller, battery, and LED light is correctly connected because poor contact or wrong connection will cause the battery to not charge normally.


 

How to improve battery charging efficiency when there is insufficient sunlight?

1. Keep the solar panel clean.

If you want to ensure that your solar panels are highly efficient, you need to clean the dust and dirt on the solar panels regularly. This is not difficult. You only need to use clean water and a microfiber cloth to clean the solar street light panels.

2. Proper placement of solar street lights

Because there is less sunlight on cloudy days, the solar panel must face the sun directly. At the same time, you also need to trim the shrubs or branches that block the panels from time to time to ensure that the solar powered streetlights can receive sufficient sunlight. When installing solar-powered LED street lights, avoid installing them next to bright light sources.

3. Use reflective surfaces

You can also place one or more reflective surfaces around the solar panel to increase the amount of light hitting the photovoltaic cells, such as mirrors or aluminum foil lights. The angle of the reflective surface should be strategically adjusted according to the changing position of the sun to ensure that the reflective surface can collect more sunlight and focus it on the solar panel.

4. Turn off the solar street light and let it fully charge for 72 hours.

This practice is to give the solar-powered LED street lights a deep charge. It is recommended that you can do it 1-2 times a month, which can make your solar cell run more efficiently.


 

The above is the relevant knowledge about solar street light charging. By charging correctly, it can ensure that solar street lights can provide people with long-term and stable lighting, which also has a positive effect on extending the service life of solar street lights. If you have any questions about the use of solar street lights, you can contact us. We are a solar street lights manufacturer with complete product specifications and excellent quality. We have been recognized by customers in many countries and look forward to cooperating with you.
 


Share:
Send Your INQUIRY
Welcome to our product consultation, here to provide you with professional solutions.