Maintenance And Care of Solar Street Lights: How to Ensure Long-term Stable Lighting Effects
Sep 21, 2024
Compared with traditional street lights, solar street lights are more energy-efficient and environmentally friendly, with more outstanding economic benefits. Solar street lights outdoor are not restricted by geographical location and can be installed anywhere with sunlight. They are especially suitable for remote areas, islands, mountainous areas and other areas that are difficult to be covered by power grids. Therefore, from urban streets to country lanes, from park scenic spots to industrial parks, solar energy street lights are gradually becoming the mainstream choice in the lighting field. Solar street light manufacturers recommend that users should perform regular maintenance when using solar street light outdoor. Scientific and effective maintenance helps solar street lights outdoor perform at their best and provide the most efficient lighting. To properly maintain solar street lights, you can do this:
Another thing to note is that the angle at which the solar panel is installed will determine the amount of sunlight it receives throughout the day. If it is not installed correctly, your lights may not receive enough power to stay on all night. Use a level to check that the solar panel is installed horizontally and adjust it as needed. Then, use a compass to make sure that the solar panel is facing due north. If not, you need to change the angle of the solar panel until it faces the right direction.
As an important part of the urban lighting system, solar street lights outdoor not only provide light for night travel, but also greatly promote energy conservation and emission reduction, fully reflecting the perfect combination of technology and environmental protection. Solar street light manufacturers believe that through scientific and effective maintenance measures, solar energy street lights can always maintain the best working condition and play a greater role in the construction of low-carbon and environmentally friendly cities.
1. Clean the solar panel
The large amount of debris and dust accumulated on the outer screen of the solar panel will hinder its ability to absorb sunlight. Usually, daily cleaning is not required because rainwater will wash away the dust attached to the solar panel on rainy days. It is recommended to clean the panel at least once every six months, depending on the rain and dust conditions at the installation site. Regular cleaning will ensure the normal operation of the solar powered street light panels. Cleaning solar panels is very simple, but be sure to avoid cleaning them when the lamps are hot. You can wet the panel with a hose to wash off all loose dust particles and debris, and then use a soft-bristled brush to wipe off the hard dust layer on the panel with soapy water. After that, wash off all the soapy water and ensure that there is no soap residue on the solar panel.2. Regularly trim surrounding trees
The less shadow there is in the location where the solar powered street lights panels are located, the more sunlight they absorb, that is, the higher the solar power generation will be, so any plants, trees, or shrubs that may block the sunlight for part of the day need to be pruned regularly to ensure that your solar panels can fully receive sunlight. You'd better keep a close eye on the shrubs and branches growing around the solar street light outdoor. Depending on how fast they grow, you may need to prune them once a month.3. Maintain or replace components
No matter how you maintain your solar powered street lights, you will need to replace the components one day. Common parts that need to be replaced are batteries, solar panels, and lamps. Batteries usually need to be replaced every two to three years, depending on the frequency of use. Solar panels usually last about five years, but they can also be damaged by debris or bad weather. Lamps usually need to be replaced every ten years, but bad weather conditions can also damage them.Another thing to note is that the angle at which the solar panel is installed will determine the amount of sunlight it receives throughout the day. If it is not installed correctly, your lights may not receive enough power to stay on all night. Use a level to check that the solar panel is installed horizontally and adjust it as needed. Then, use a compass to make sure that the solar panel is facing due north. If not, you need to change the angle of the solar panel until it faces the right direction.
4. Clean the bulb
If you find that the light emitted by the bulbs of your solar street lights outdoor is very weak, the cause may not be the solar panels and batteries. Instead, the bulb needs to be cleaned. Since the bulb is exposed to the outdoor environment most of the time, dust and debris will cover the outer shell of the bulb. Therefore, it is best to remove them from the lamppost and wash them thoroughly with soapy water. Don't forget to wipe off the water at the end to make the bulb more shiny.5. Check the connection and wires.
You should check the wires for damage and disconnection every 3 to 6 months. This is because the wires connecting the lamp and the solar panel may be bitten by wild animals. Following this step will significantly extend the life of the solar energy street lights. If you find any abnormalities or problems with the wires, replace the wires to avoid small problems that cause the entire system to shut down.As an important part of the urban lighting system, solar street lights outdoor not only provide light for night travel, but also greatly promote energy conservation and emission reduction, fully reflecting the perfect combination of technology and environmental protection. Solar street light manufacturers believe that through scientific and effective maintenance measures, solar energy street lights can always maintain the best working condition and play a greater role in the construction of low-carbon and environmentally friendly cities.