Home > Blog > Company
bLOG

Tips To Ensure Your Solar Street Lights Get Enough Sun

Nov 07, 2024
As an environmentally friendly and energy-saving lighting device, solar street lights mainly use solar energy as their energy source. During the day, solar panels receive sunlight, convert it into electrical energy, and store it in batteries. At night, when the light sensor detects that the light is getting darker, the electrical energy stored in the battery will light up the LED lights and start to provide lighting for people. Through the working principle of solar led street lights, we can see that sunshine conditions are crucial for the normal operation of solar powered LED street lights, but why sometimes your solar street lights cannot receive sufficient sunlight? If this happens, what do you need to do?

solar led street lights
 

Why don't your solar street lights get enough sun?

1. Improper installation position

The solar street lights are improperly installed, and there are tall buildings or trees around them, so the solar panels cannot receive sufficient sunlight.

2. Dirty surface of solar panels

If the surface of solar panels is not cleaned for a long time, dust or dirt will accumulate, affecting the absorption of sunlight. Especially in areas with strong winds and sand, solar panels need to be cleaned regularly; otherwise, this dust or dirt will block sunlight from directly shining on the panels, thereby reducing their conversion efficiency.

3. Aging or damage of solar panels

Solar panels may age or become damaged due to environmental factors (such as wind, rain, high temperature, etc.) during long-term use. The conversion efficiency of aged solar panels will decrease, and damaged panels may not work properly.

4. Battery aging or failure

If the battery storage capacity of the solar led street lights decreases, even if there is sunlight during the day, it will not be able to store enough electricity for use at night, so it is necessary to check whether the battery is operating normally and replace it if necessary.

5. Weather reasons

If there is continuous rainy weather, insufficient sunlight will cause insufficient charging time for solar powered LED street lights and poor lighting effects. In addition, in the cold winter, the sunshine time is short and the solar panels cannot get enough sunlight.

solar powered LED street lights
 

How do you ensure that your solar street lights get enough sunlight?

1. Reasonable site selection and layout

The installation location of the solar led street lights should be open, without tall buildings around or lush trees blocking it. In addition, the orientation of the solar panel should be set according to the actual situation. Generally speaking, if you are located in the northern hemisphere, the solar panel is generally facing south. You also need to adjust the specific orientation according to the local geographical location and seasonal changes to ensure that the solar panel can receive sufficient sunlight all year round.

2. Optimize the design of solar panels

Solar street light manufacturers recommend that you choose to customize solar panels with higher conversion efficiency when choosing solar street lights to improve the photoelectric conversion efficiency. When installing solar powered outdoor street lights, it is necessary to reasonably adjust the tilt angle of the solar panel according to the local latitude so that it can maximize the reception of sunlight at different angles in summer and winter.

3. Regular maintenance and cleaning

Dust and dirt accumulated on solar panels will seriously affect the photoelectric conversion efficiency of solar panels. Therefore, after the solar street lights are put into use, the solar panels need to be cleaned regularly to ensure that the panels are clean. In addition, it is also necessary to regularly check whether the connecting wires and fixtures of the solar panels are loose or damaged, check the health of the battery, and ensure that all components of the solar street lights are working properly to keep the system running efficiently.

4. Use intelligent control systems

Your solar powered outdoor street lights can use intelligent control systems to automatically adjust the on/off time of the street lights according to the intensity of ambient light, ensuring that they are automatically turned on when there is insufficient light and turned off in time when there is sufficient light, which saves energy and extends the service life. Through the Internet of Things technology, remote monitoring and management of solar powered outdoor street lights can be achieved, and problems such as insufficient light and low battery power can be discovered and solved in time.

solar powered outdoor street lights
 

Summary

During the use of solar street lights, due to different geographical locations or different climatic conditions, its use effect is somewhat different. When purchasing solar powered LED street lights, you must choose according to the actual use needs and use environment. If solar street lights do not receive sufficient sunlight, it will seriously affect their lighting effect and operating time. We can avoid this situation through a variety of methods to enable solar street lights to receive and convert as much solar energy as possible.
 


Share:
Send Your INQUIRY
Welcome to our product consultation, here to provide you with professional solutions.